Features

5312TFC intelligent fiber slurry paver, improved is mainly applied to treat the pavement diseases like friction resistance reduction, cracks and ruts for improving its performances of anti-slide and waterproofing, evenness and travelling comfort. This equipment can be widely used in construction of slurry seal, modified slurry seal, micro surfacing and fiber micro-surfacing.


.   2


Working Principle

5312TFC intelligent fiber slurry paver is to polymer modified asphalt emulsion, clean crushed aggregate, mineral fillers, fibers, water and necessary additives , by a certain percentage transported into a mixerformed by the rapid mixing of emulsified asphalt slurry mixture into the paver box, by spiral dosing uniformly flat paving the road.

5312TFC intelligent fiber slurry paver is a special equipment in Slurry seal construction technology ,Micro-surfacing construction technology,  Fiber Micro-surfacing construction technology. to meet the slurry seal short mixing time, forming speed, paving thickness thin, to achieve the construction of fast, low cost, wide application , saving energy etc.

Construction Technology

Slurry Seal Construction Technology

That means a slurry seal of emulsified asphalt slurry seal with the appropriate graded stone chips and sand aggregate, emulsified asphalt as binder, adding a certain percentage of filler (cement, lime, fly ash, slag, etc.) , additives and water and other materials, through mixing uniformity of slurry mixture, and uniform thickness and width of paving as required in the pavement of asphalt surface treatment thin layer. 

 

details

 

 

 Micro-Surfacing Construction Technology

 Micro-surfacing is the use of special equipment, the polymer modified asphalt emulsion, appropriately graded aggregate, filler (cement, lime, fly ash, slag, etc.), water and additives, after a reasonable proportion mix was stirred to form a uniform slurry mixture, and paving on the road quickly and evenly, lamellar structures open traffic within 1 to 2 hours after paving.

Fiber Micro-Surfacing Construction Technology

5312TFC intelligent fiber slurry paver is to polymer modified asphalt emulsion, clean crushed aggregate, mineral fillers, fibers, water and necessary additives , by a certain percentage to mix to slurry mixture , paving with a high slip resistance and durability of the thin layer structure and can open traffic soon.Its different from Micro-surfacing construction technology is  grading (gap grading) and fiber to add.

Fiber in asphalt mixture of asphalt can effectively improve the gel structure to form a three-dimensional dispersion form, play a reinforcement effect, and make asphalt, slag, etc. in the asphalt mixture is uniformly dispersed, can effectively prevent the micelles and oil spillage. The advantage is to improve the road surface friction resistance, durability and resistance to fatigue, has a good absorption capacity, resistance to deformation, super waterproof, can effectively prevent cracks in the road surface reflection, greatly extend the pavement life. Adding fiber micro-surfacing pavement life can increase about 30%, about 50% reduction in the amount of rutting.

 

Specification

Product Name

Fiber Slurry Paver

Fiber Slurry Paver

 Slurry Paver

 Slurry Paver

Product Model

HD5312TFCSF

HD5311TFCSF

HD5319TFC

HD5254TFC

Emission Standard

Euro V

Euro V

Euro V

Euro V

Chassis Model

ShacmanX3000/SX1310XB6

ShacmanX3000/SX1310XB6

Sinotruck/ZZ1317N

Sinotruck/ZZ1257N

Chassis Engine Power

276KW/375hp

276KW/375hp

228KW/310hp

228KW/310hp

Auxiliary Engine Power

119KW/160hp

119KW/160hp

119KW/160hp

73.6KW/100hp

Fiber Tank Addictive Amount

≤3.5kg/min

≤3.5kg/min

/

/

Fiber Tank Capacity

0.2m3

0.2m3

/

/

Mixer Discharging Volume

≤3.5t/min

≤3.5t/min

≤3.5t/min

≤3.5t/min

Spreader Box Width

2.5-4.3m

2.5-4.3m

2.5-4.3m

2.5-4.3m

Aggregates Hopper Volume

12m3

12m3

12m3

10m3

Emulsion Tank Volume 

4m3

4m3

4m3

3.7m3

Water Tank Volume

4m3

4m3

4m3

3.7m3

Additive Tank Volume

400L

400L

400L

400L

Filler Tank Volume

2×0.5m3

2×0.4m3

2×0.5m3

2×0.5m3

Total Weight

31000kg

31000kg

31000kg

25000kg

Dimensions

11820×2496×3340mm

11820×2496×3490mm

11690×2500×3300mm

10450×2500×3500mm

 


HAVE QUESTIONS?
PLEASE LEAVE YOUR MESSAGE
Please enter a valid email address.
*
*
*

FAQ

    Q What is the difference between seal coat and slurry seal?

    2020-04-20 09:34
    A Slurry seal is a cold mix paving treatment containing aggregates, asphalt emulsion and water, while sealcoat is an emulsion containing liquid asphalt, mineral fillers and other additives. The main difference is that slurry seal has large aggregate.

    Q What is slurry seal used for?

    2020-04-17 10:34
    A Slurry seal is another asphalt maintenance treatment that can save you money now in asphalt repairs later. Slurry seal helps to prevent water from damaging your asphalt, creates a new wear surface, and provides a fresh look for you asphalt roadway.

    Q We **** Ltd are basically epc contractors and we also execute infrastructure development works . So basically we are interested in micro surfacing paver . So pls send us the detailed technical specifications and a rough quote on our mentioned email id so that we could further discuss for its immediate procurement .

    2020-01-24 17:46
    A Ok,thanks for your inquiry,our sales manager will contact you and send you the quote soon.

    Q What is the machine called that lays asphalt?

    2019-12-11 14:06
    A A paver (paver finisher, asphalt finisher, paving machine) is a piece of construction equipment used to lay asphalt on roads, bridges, parking lots and other such places. It lays the asphalt flat and provides minor compaction before it is compacted by a roller.
Slurry Seal / Micro-surfacing Paver

Copyright © 2019 Henan Sinoroader Heavy Industry Corporation. Amallink.com