Features

Sinoroader | Bitumen Decanter
BD series Bitumen decanter is our company's key R&D equipment. After continuous experiment and improvement, now we are providing two types of bitumen decanter to customers. One is the direct-heating form of bitumen melting machine, and the equipment is burned through the burner. Diesel or natural gas provides heat for melting and melting of the bitumen; one is to heat and melt the bitumen by heat radiation from the thermal oil in the thermal oil furnace.

Directly-heated-Drummed-Bitumen-Decanter

Main Features & Advantage: 
1.Turning over the barrel and turning the barrel into mixer can be completed in one time, single bitumen decanting process takes less than 20s.
2.The machine automatically reverses the oil barrel instead of manually turning over the oil barrel, which greatly reduces the labor intensity of the workers.
3.The bitumen pump set has an internal circulation function to optimize the heat transfer coefficient and increase the bitumen melting speed.
4.The electrical operating system uses in both manual and automatic ways.
5.Hydraulic cylinder speed can be adjusted according to actual needs.
6.Automatic slag removal: The equipment has automatic slag removal function. The asphalt pipeline system is provided with a filtering device, which can automatically remove the slag of the barreled bitumen through the filtration of the filter.
7.Environmental protection: closed structure, no pollution.
8.Adaptability: It can be customized according to various sizes of asphalt drums.
9.Convenient relocation: The whole machine adopts modular design and compact structure, which is convenient for relocation and quick assembly.
Barrel-Bitumen-Decanter1

Sinoroader | Hydraulic Barrel Tumbling System
This system consists of a platform, a barrel arm and a hydraulic power units. 
Use a forklift to place the over-opened oil barrel on the platform. The barrel arm is hydraulically driven to descend the mechanical collision platform, the platform is turned over, and the oil barrel falls onto the barrel arm. The hydraulically driven barrel arm pushes the bucket up to the machine body.
The hydraulic pumping station uses a motor-driven hydraulic pump to provide power to the equipment.

翻桶上料

Sinoroader | Barrel-melting Body Bitumen Decanter,Drummed Bitumen Decanter,Hydraulic Bitumen Decanter,Drummed Bitumen Melting Machine.
In order to ensure the heat-dissipation efficiency and prevent heat loss,the device is completely insulated with 100 mm rock wool.
The inside of the equipment is divided into upper and lower rooms. The upper room is for heating the bitumen barrel. The upper chamber temperature is kept at about 70 degrees.The bitumen in the barrel is softened by heat and flows out to the lower chamber of the equipment. The melted bitumen continues to be heated in the lower chamber to pumping temperature (120℃).

Sinoroader | Bitumen Heating system
In the hot oil heating bitumen decanter ,all the heating of the bitumen is done by thermal oil; the equipment with the burner, the heating of the bitumen barrel is completed by the thermal oil, and the heating of the melted bitumen is through the hot steam generated by the burner.

Barrel-Bitumen-Decanter


Sinoroader | Pump Set and Asphalt Piping System
The asphalt pump set adopts a screw pump, and cooperates with the heat preservation three-way valve to complete the pumping and internal circulation functions. In the asphalt pipeline system, a filtering device is provided to automatically remove the barreled asphalt slag. The burner heating device is equipped with a heat-conducting oil pump to accelerate the heat-conducting oil circulation and accelerate the heat exchange rate between the heat-conducting oil on the upper part of the equipment and the asphalt drum.

导热管

Sinoroader | Electrical Control System
The electrical operating system adopts manual and automatic methods. You can switch freely according to your needs
Drummed-asphalt-Bitumen-Decanter


Specification


Model

BD-40E

BD-36D

Productivity(t/h)

8-10

6-8

Quantity of Asphalt Buckets

20×2

18×2

Asphalt Pool Capacity(m³)

17

15

Bucket Way

Hydraulic

Heating Method

Thermal Oil

Burner

Power(Kw)

18.5

25

Dimensions(mm)

10500*2250*2450

1000*2250*2450



HAVE QUESTIONS?
PLEASE LEAVE YOUR MESSAGE
Please enter a valid email address.
*
*
*

FAQ

    Q Does the bitumen decanter need to be equipped with a hot oil boiler?

    2020-01-06 11:06
    A BD-40H needs to be used with a heat transfer oil boiler, while the BD-36D is a self-contained burner heating system which does not require a heat transfer oil boiler.

    Q Is the bitumen decanter continuous or intermittent?

    2019-12-31 14:43
    A Our equipment is continuous from the side of the barrel, and then from the other side of the asphalt barrel.

    Q Does the bitumen drum need to be manually flipped?

    2019-12-13 09:47
    A Our bitumen decanter is equipped with a hydraulic flip structure,so do not require manual turning.

    Q How many drums of bitumen can the equipment accommodate?

    2019-11-28 16:07
    A There are two different types of equipment that can accommodate 36 drums of bitumen and 40 drums of bitumen.

    Q How to melt the bitumen

    2019-09-11 10:12
    A The interior is divided into bitumen barrel heating, bitumen heating two sets.The heating part of the bitumen barrel is located in the bitumen barrel room, surrounded by heating coils. The heating tube and the bitumen barrel mainly exchange heat in
Hydraulic Drummed Bitumen Decanter

Copyright © 2019 Henan Sinoroader Heavy Industry Corporation. Amallink.com